Download this complete Project material titled; Gsm Based Remote Switching System with abstract, chapters 1-5, references, and questionnaire. Preview Abstract or chapter one below

  • Format: PDF and MS Word (DOC)
  • pages = 65

 5,000

CHAPTER ONE

INTRODUCTION
1.1 Background of study
Has technology transformed humankind into omniscient being? Years back,
communication was done through difficult means like travelling to the
destination of the second party, posting letters est. Today people can
communicate easily through various means like e-mailing, face booking,
GSM etc. The new age of technology has redefined communication, most
people nowadays have access to mobile phones and thus the world indeed
has become a global village. At any given moment, any particular individual
can be contacted with the mobile phone. But application of mobile phones
cannot be restricted to sending SMS or starting conversation. New
innovation and ideas can be generated from it that can further enhance its
capabilities. Technologies such as infra-red, Bluetooth etc which has
developed in recent years goes to show the very fact that improvement are
infact possible and those improvement have eased our life and the way we
live. Remote management of several home and offices appliances is a subject
of growing interest and in recent years we have seen many systems
providing such controls.

2

These days, apart from supporting voice calls, a mobile phone can be used to
send text message as well as multimedia message (that may contain pictures,
graphics, animation, etc). Sending written text messages is very popular
among mobile phone users. Instant messaging as it is known, allows an
individual to share ideas, opinions and other relevant information. I have
used this to design a system that allows a platform to receive calls which
infact are commands sent to control different appliances and device
connected to the platform. The design of this control system system is based
on the GSM technology that effectively allows control from a remote area to
the desired location. The application of the suggested system is immense in
the ever changing technological world. It allows a greater degree of freedom
to an individual whether it is controlling the household appliances or office
equipments. The need to be physically presenting order to control appliances
of a certain location eliminated with the use of this system.
The research is borne out of the need for man to control electrical devices
that are remotely located to him. Anything from home devices such as
alarms, heaters, air conditioner and so on, IT equipment such as routers and
servers can be controlled.
The desire for man to control an object that is remotely located to him has
been for many ages. However, the technology that meets the perfect desire in
3

this respect has not been obtained, though there is increasing improvement in
technology that struggles to meet this need in terms of accuracy, speed, ease
of operation and limitless operation point. The introduction of the global
system for mobile communication (GSM) and particularly the use of hand
held mobile phones brought the innovation of distance communication at
remote location. Based on this, research utilizes this facility for remote
control of systems and appliances, take for instance, a man on a journey
inside his car suddenly remembers that he left the air conditioner (AC) ON
when it was supposed to be OFF. The normal condition is to drive back and
switch OFF. But with the GSM mobile phone in the hand, one looks on how
the same could be used to effect control at any point and time.
1.2 Statement of problem
Technology has advanced so much in the last decade or two that it has made
life more efficient and comfortable. The comfort of being able to take
control of devices from one particular location has become imperative (i.e.
important) as it saves a lot of time and effort. Therefore there arises a need to
do so in a systematic manner which will be implemented in the proposed
system. The system is an extended approach to automating a control system.
With the advancement and breakthrough in technology over the years, the
lives of people have become busier than before. With the adoption of this
system, we can gain control over certain things that require constant
4

attention. The application of this system comes in handy when people who
forget to do simple things such as turn ON or OFF devices at their homes or
at their offices. They can now d so without their presence by the
transmission of a simple call from their mobile phone. This development , I
believe will ultimately save a lot of time especially when people do not have
to come back for simple things such as to turn ON or OFF at their homes or
at their office once they set out for their respective work or appointment.
1.3 Project Aims and objectives
The project “GSM control system” as the title suggests is aimed to construct
a control system that enables the complete control of the interface on which
it is based.
General objectives of the project are :
a. To co-ordinate appliances and other devices through calls.
b. To effectively receive and transmit data via calls.
c. To eliminate the need of being physically present in any location for
tasks involving the operation of appliances with household/office.
d. Minimize power and time wastage.
e. It allows a great degree of freedom to an individual.

5

1.4 Justification of study
o The proposed project can be used as a reference or as a base of realizing a
scheme to be implemented in other project of greater level such as device
synchronization, temperature updates, weather forecasting etc.
o The project itself can be modified to achieve a complete home automation
system which will then create a platform for the user to interface between
himself and the household.
o It can be used by companies for management purpose example is switching
ON/OFF the server in other to manage the bandwidth.
1.5 Scope of the study
The project covers the aspect of just being able to switch ON/OFF any electrical
appliance connected to the circuit.
1.6 Project Report Organization
The project is designed to have five chapters, which will explain in details
the various aspects of system. The first chapter gives an introduction to GSM
control system along with the project aims and objectives, with emphasis to
the scope in order to achieve the desired goal and limitations to the study.
Chapter two is on literature review which contains a review of previously
implemented systems.
Chapter three contains the details of the entire major component that were
used in the actualization of the hardware part of the project.
6

Chapter four deals with the implementation and the testing, the chapter
contains the major work of the project.

Chapter five summarizes and concludes the project work on GSM – Based
Remote switching system. Recommendations are also stated.

GET THE COMPLETE PROJECT»

Do you need help? Talk to us right now: (+234) 08060082010, 08107932631 (Call/WhatsApp). Email: [email protected].

IF YOU CAN'T FIND YOUR TOPIC, CLICK HERE TO HIRE A WRITER»

Disclaimer: This PDF Material Content is Developed by the copyright owner to Serve as a RESEARCH GUIDE for Students to Conduct Academic Research.

You are allowed to use the original PDF Research Material Guide you will receive in the following ways:

1. As a source for additional understanding of the project topic.

2. As a source for ideas for you own academic research work (if properly referenced).

3. For PROPER paraphrasing ( see your school definition of plagiarism and acceptable paraphrase).

4. Direct citing ( if referenced properly).

Thank you so much for your respect for the authors copyright.

Do you need help? Talk to us right now: (+234) 08060082010, 08107932631 (Call/WhatsApp). Email: [email protected].

//
Welcome! My name is Damaris I am online and ready to help you via WhatsApp chat. Let me know if you need my assistance.