Construction Of Steel Frame Drawing Desk

TABLE OF CONTENT

TITLE PAGE

CERTIFICATION

DEDICATION

ACKNOWELEDGEMENT

ABSTRACT

TABLE OF CONTENT

LIST OF FIGURE

LIST OF TABLE

NAME OF PLATE

CHAPTER ONE

1.0       INTRODUCTION   

1.2       General Description and Characteristics

1.3       General Statement of Problem

1.3       Significant of the Project

1.4       Objective of the Project

1.5       Limitation of the Study

1.6       Definition of Terms/Concepts

CHAPTER TWO

2.0       LITERATURE REVIEW

2.1       Historical Background

2.2       Uses of Drawing Desk

2.3       Safety

2.4       Type of Drawing Desk

2.5       Types of Steel Building Construction

2.6       Important Features of Steel Framing Structure or Work

CHAPTER THREE

3.0       RESEARCH, DESIGN AND METHODOLOGY

3.1       Brief Outline of the Chapter

3.2       Design

3.3       Selection of Materials

3.4       Design Consideration

3.5       Method used in Joining Metals

3.6       Mechanical Properties

3.7       Assembly

3.8       Maintenance

3.9       Cost Estimation

CHAPTER FOUR

4.0       RESULT AND DISCUSSION

4.1       Result

4.2       Discussion

CHAPTER FIVE

5.0       CONCLUSION AND RECOMMENDATION                                                    

5.1       Summary of the Findings

5.2       Recommendation

REFERENCES

ABSTRACT

It is very essential that, every organizations or establishment set-up either for profit making or non-profit making such as, industries, commercial set-up places, institutions etc. need to be popularized or make it to known to people, the nature of the business that is going on there. A drawing board (also drawing table, drafting table or architect’s table) is, in its antique form, a kind of multipurpose desk which can be used for any kind of drawing, writing or impromptu sketching on a large sheet of paper or for reading a large format book or other oversized document or for drafting precise technical illustrations. The drawing table used to be a frequent companion to a pedestal desk in a gentleman’s study or private library, during the pre-industrial and early industrial era. The project (steel frame drawing desk) was installed, tested and recommended for use.

The report was made on the project fabricated where, introduction, uses, methodology and other information were treated in the chapter of the report.

CHAPTER ONE

• INTRODUCTION

The metallic drawing table is a special kind of table that is made up of metal frame and wood surface which is smooth and suitable for drawing. The need for this construction will determine the size of the table. There could have been no development in the world without the art of drawing when the immediate expression of creative process is as it evolves. It is sufficient to note that drawing in designing was with engineers done to produce for those manufacturers what they needed. The level of any nation cannot be fast fetched if not for due invention of modern instrument in the country. The equipment is produced in such a way that it is effective, convenient and economically feasible and does not in any way impair the health of the citizenry. All the effort used in the venation of this instrument is to make life easier and meaningful. This invention cannot be over emphasized without drawing. Drawing contributes immensely in several areas of engineering work. For instance in communication, documentation of information design of equipment and flexibly in design cannot be obtained without the help of a standard drawing desk. As an engineer, the fact that he has to design, operate and optimize the complete process makes drawing a necessity and the means through which this can be done is by the use of a standard drawing desk. Good performance also requires high degree of interaction between the components within and between the frames. The interaction requires the specifications of components that complement one another. The functional performance of the metallic frame desk is dependent on the correct specification of the individual components that makes up the desk, construction quality of these components and the standard of installation.

1.1       General Description and Characteristics

Today tables are totally utilitarian in design, enabling the professional draftsman to use them as tools of their trade. All tables come with every necessary drawing instrument incorporated into their design. Whether it is a set square, a protractor or any other tool that is required, it is to be found on the drafting table. Although called a table, a drawing desk is actually vertical in design which permits the user to sit in front of them in order to draw whatever they need to on the sheet of paper which is placed on the board. At the base of the large frame that holds the sheet of paper there is a narrow Ledge where the user can place his drawing implements, such as pencil or pen. Everything that the user needs is close to hand so that the task he is attempting is made as easy as possible for him to do.

1.2       Statement of Problem

• The ability of the frame desk to satisfy its functional requirement which depends on the correct specification and installation.

1.3       Objectives of this Project

The objectives of the construction of a steel drawing desk are highlighted below:

• To construct a portable drawing desk.
• To do a detailed geometrical analysis of the desk and use the best materials, base on the knowledge of properties of material and material selection.
• To construct a desk that would be long lasting.
• To carry out a review of literature of welding operations.
• To meet the need of draftsmen, craftsmen, technicians and engineers.

1.4       Significant of the Project

The significant of this project (construction of a steel drawing desk) are as follows:

• They make the work of drawing and sketching on a large work surface area much easier.
• Whether one is working with building plans or drawing a large sized picture, these tables provide the perfect place for one to work.
• With the very wide spaced work board of these tables, the entire drawing can be easily viewed at the same time.

1.5       Limitation of the Study

The efforts involved in having the required specifications of the individual component.

1.6       Definition of Terms/Concepts

• Sawing: The cutting of wood by means of saw either by hand or by machine saw
• Planking: The smoothening of the surface and edges of sawn timber taking off shearing by planes.
• Shooting: The planking of the edges or ends of boards perfectly straight and square to the face side.
• Chamfering: A cut that is made in wood or some other material, usually at a 45° angle to the adjacent principal faces.
• Drilling: Is a cutting process that uses a drill bit to cut a hole of circular cross-section in solid materials.
• Grinding: Is an abrasive machining process that uses a grinding wheel as the cutting tool.
• Centre punch: Is used to mark the center of a point. It is usually used to mark the centre of a hole when drilling holes.
• Welding: Is a fabrication or sculptural process that joins materials, usually metals or thermoplastics, by causing fusion, which is distinct from lower temperature metal-joining techniques such as brazing and soldering, which do not melt the base metal.
• Painting: Is the practice of applying paint, pigment, color or other medium to a solid surface (support base).
• Installation: The act or process of putting a piece of equipment together or making a machine and made ready for use.
• Performance: Performance is a specialty systems engineering discipline that encompasses the practices, techniques, and activities required during each phase of the Systems Development Life Cycle to ensure that a proposed or existing solution will meet its non-functional requirements.
• Interaction: Interaction is the subject area of design, implementation and evaluation of compelling, innovative interactive systems.

Quality: This is the degree of excellence in the quality of the product.

Order For Complete Work Now

GET THE COMPLETE PROJECT»

Do you need help? Talk to us right now: (+234) 08060082010, 08107932631 (Call/WhatsApp). Email: [email protected].

IF YOU CAN'T FIND YOUR TOPIC, CLICK HERE TO HIRE A WRITER»

Disclaimer: This PDF Material Content is Developed by the copyright owner to Serve as a RESEARCH GUIDE for Students to Conduct Academic Research.

You are allowed to use the original PDF Research Material Guide you will receive in the following ways:

1. As a source for additional understanding of the project topic.

2. As a source for ideas for you own academic research work (if properly referenced).

3. For PROPER paraphrasing ( see your school definition of plagiarism and acceptable paraphrase).

4. Direct citing ( if referenced properly).

Thank you so much for your respect for the authors copyright.

Do you need help? Talk to us right now: (+234) 08060082010, 08107932631 (Call/WhatsApp). Email: [email protected].